When businesses start looking at a scissor lift for sale, most of them are trying to answer one question.
Which one do we need?
The options can look confusingly similar. Most scissor lifts go up and down, most carry people and tools, and most listings lead with a height figure. But buy the wrong size, the wrong base or the wrong power setup and you end up with a machine that cannot reach the job, will not fit through the door or struggles the moment it leaves a smooth slab.
So how do you tell the difference before you spend the money? It starts with a few practical checks.
Start With Working Height Not Platform Height
This is where a lot of buyers trip up.
Scissor lifts are usually listed by working height, but some specs quote platform height instead. They are not the same thing. Working height generally allows for the reach of a person standing on the platform, which is usually around two metres above the platform floor.
So before you compare scissor lifts for sale, work out:
- the highest point your team needs to reach
- whether that is a regular task or a one off
- any overhead obstructions like beams, ducting or lighting
- whether the spec you are reading is working or platform height
Buying a little more height than you need can make sense if your work varies. Buying far more than you need usually means a bigger, heavier machine that is harder to move around your site.
Think About Where The Scissor Lift Will Work
Height tells you how far up the machine goes. The ground and the building tell you whether it can get there.
Smooth slabs and indoor work
For warehouses, retail fit outs, factories and maintenance work on concrete floors, a standard or compact scissor lift is usually the right fit. Compact models are narrower, which helps when you need to get through doorways, down aisles or into lifts and tight service areas.
Rough ground and outdoor sites
Construction sites, yards and uneven outdoor surfaces are a different story. A tracked scissor lift spreads its weight across tracks instead of wheels, which helps on softer or rougher ground. Models with stabilising legs add extra support when the platform is raised on less forgiving surfaces.
If your machine will split its time between indoor and outdoor work, be honest about which one it will do most. That answer should drive the choice.
Check The Platform Capacity And Space
A scissor lift is not just about getting one person up high. It is about getting the job done once they are there.
Every machine has a rated platform capacity, and that limit has to cover the people, tools and materials on the platform together. Platform size matters too. A deck that is too small means more trips up and down, and more time wasted.
Think about what a typical job looks like:
- how many workers need to be on the platform
- what tools and materials go up with them
- whether an extension deck would help reach over obstacles
- how often the machine needs to be repositioned
Getting this right keeps your team working safely within limits instead of trying to squeeze a job onto a machine that was never built for it.
Why Electric Scissor Lifts Make Sense For Most Businesses
Electric scissor lifts are the default choice for a lot of sites, and for good reason.
They are quiet, produce no exhaust fumes at the point of use and are well suited to indoor work where people are nearby. Modern lithium-ion battery systems go further, with less routine battery maintenance than older lead acid setups and the flexibility to top up charge when it suits.
For businesses that also run electric forklifts or warehouse machinery, a lithium scissor lift fits neatly into the same charging routine. That makes the whole fleet simpler to manage.
Scissor Lift Or Boom Lift
Sometimes the real question is whether you need a scissor lift at all.
A scissor lift goes straight up. It is stable, roomy and ideal when the work sits directly above a spot you can drive to. A boom lift goes up and out, which makes it the better choice when you need to reach over machinery, around obstacles or out from the base.
Licensing is different too. In Queensland, a high risk work licence is required for boom-type elevating work platforms with a boom length of 11 metres or more. WorkSafe Queensland explains the details on its boom-type elevating work platform licence page. Scissor lifts are not boom-type platforms, but operators still need proper training and familiarisation on the machine they use.
Safety, Training And Inspections
A scissor lift lifts people, so safety is not optional.
Operators should be trained on the specific machine, understand its limits and complete pre start checks before each shift. Ground conditions, overhead hazards, wind and platform loads all need to be considered before the platform goes up. Safe Work Australia’s guide to managing the risks of elevating work platforms covers the common hazards and the controls businesses should have in place.
Ongoing maintenance matters just as much. WorkSafe Queensland notes that elevating work platforms must be inspected at least annually, on top of routine servicing and daily checks. That is worth factoring into your decision, because buying from a supplier with a local service team makes staying on top of it much easier.
How Eagle Forklifts Helps You Choose The Right Scissor Lift
Eagle Forklifts carries a full range of lithium-ion scissor lifts, from a 6.5 metre model through to a 16 metre machine, including compact units for tight indoor spaces and tracked models with stabilising legs for rougher ground.
That range means the team can match the machine to your job rather than pushing whatever happens to be closest. The conversation starts with your working height, your ground conditions and the way your team works, then narrows down from there.
New machines come with a 5 year warranty, and Eagle’s service team supports Brisbane and Southeast Queensland businesses with servicing, repairs and genuine parts after delivery. With more than 30 years in the industry and Australia-wide delivery, it is support that lasts well beyond the sale.
Find The Right Scissor Lift For Your Work
If you are comparing a scissor lift for sale, the right choice comes down to working height, ground conditions, platform capacity and access around your site.
You can browse Eagle Forklifts’ scissor lift range here, compare the boom lift range, or contact the team for practical advice on which machine suits your job.
Frequently Asked Questions About Scissor Lifts
What is the difference between working height and platform height?
Platform height is how high the platform floor rises. Working height allows for the reach of a person standing on the platform, which is generally around two metres higher, so always check which figure a spec sheet is quoting.
Do you need a licence to operate a scissor lift in Queensland?
The high risk work licence for elevating work platforms applies to boom-type platforms with a boom length of 11 metres or more, as explained on WorkSafe Queensland’s boom-type EWP licence page. Scissor lift operators still need training and familiarisation on the machine they use.
Can a scissor lift be used on rough ground?
Some can. Tracked scissor lifts and models with stabilising legs are designed for rougher or softer surfaces, while standard and compact models are best suited to smooth, level floors.
Are electric scissor lifts suitable for outdoor use?
Many electric scissor lifts can work outdoors within the manufacturer’s limits, including wind ratings and ground conditions. Check the machine’s specifications and compliance plate before using it outside.
How often does a scissor lift need to be inspected?
Operators should complete pre start checks before each use, and WorkSafe Queensland states that elevating work platforms must be inspected at least annually. Routine servicing should follow the manufacturer’s schedule.






